Tec7 Trans Transparant Universal Sealing Adhesive - 50ml

€4,50

TRANSPARENT UNIVERSAL SEALING ADHESIVE
✅ Can be applied to wet substrate
✅ Fungus and bacteria-resistant

In stock (13)

Quantity

- +

Add to cart

Product description

Base: MS polymer.
Nature: elastic paste.
Colour: crystal clear.
Flow: 5 bar / 3 mm / 23°C 160 g/min.
Skin formation: 23°C 50% R.H. 5 minutes.
Tack-free: 23°C 50% R.H. 40 minutes.
Full hardening: 23°C 50% R.H. :
- 24h - 4 mm
- 48h - 5 mm
- 72h - 8 mm
Hardness - DIN 53505: 40 Shore A.
Volume shrinkage after curing: < 2%.
Tensile strength: 220 N/cm².
Tear strength - DIN 53507: ca 40N/cm².
Thermal stability: - -30°C to +95°C - peak: 155°C - max. 30 minutes.
E-module: 100% 0,9 mPa.
Adhesion: excellent on (among other things) tiles, cement, natural stone, wood, concrete, aluminium, with the exception of PP, PE, PTFE and bitumen.
Elongation at break - DIN 53504: >350% UV-resistance: over time discolouring can develop due to external influences.
Overpaintable: OK with most solvent- and water-based lacquers.
Pressure resistance (ISO 11432): 0,84 N/mm².
Chemical resistance:
- good: water, seawater, aliphatic solvents, greases, diluted organic acids, lyes, oils.
- moderate: esters, ketones, aromatics.
- poor: concentrated acids, chlorinated solvents.
Shelf life: 12 months, in closed original packaging, dry, cool and frost-free.
Safety measures: Please consult the safety data sheet.

Processing temperature from +5°C to +40°C.
Apply to clean, dust and grease-free substrate.
Use Tec7 Prepare & Finish to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean.
Apply with manual or air caulking gun (best with telescopic plunger).
Due to the wide variety of different plastic materials and compositions, as well as materials that are prone to stress cracking, preliminary trials are recommended.
Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or porous substrates with Fixprimer.
Due to the diversity of varnishes and paints on the market we recommend preliminary tests. Using products based on alkyd resins may delay the drying process.
When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
Ideal adhesive thickness for optimal adhesion strength: 3 mm.
Use in jointing and sealing: